After updating firmware my dvdrw has no drivers
Most routers have a built-in update checker, which may or may not perform the entire process automatically.If you're using an Apple Air Port router, you can use the Air Port Utility program to check for updates.My SATA DVD did not survive the upgrade from Win7 to 10. I'm running 8.1 and successfully upgraded to 10 last night. REG files) and moved the drivers out so I think that is all cleaned up. CD/DVD drive not recognized - Page 3 - Windows 10 Forums Fixed me right up with this reghack add "HKLM\System\Current Control Set\Services\atapi\Controller0" /f /v Enum Device1 /t REG_DWORD /d 0x00000001 Original answer from answers.but I found it here. CD/DVD drive not recognized - Page 3 - Windows 10 Forums Fixed me right up with this reghack add "HKLM\System\Current Control Set\Services\atapi\Controller0" /f /v Enum Device1 /t REG_DWORD /d 0x00000001 Original answer from answers.but I found it here. Since my motherboard supports up to four SATA devices (two on channel 0 and two on channel 1), I was finally able to get my DVD Writer to be recognized by adding a registry entry for all four SATA devices and then rebooting: add "HKLM\System\Current Control Set\Services\atapi\Controller0" /f /v Enum Device4 /t REG_DWORD /d 0x00000001 (Yes, I know that the Enum Device probably starts with base 0 (Enum Device0), but having the extra registry entry doesn't seem to hurt.) This issue is as simple as the subject line. You're still booted to the active drive, and updating that one....The instructions below can be used for both internal and external CD, DVD or Blu-Ray drives but some of the fundamentals might be a little different.The instructions below applies to the following Microsoft Windows Operating Systems, however some instructions may slightly vary with older version of Microsoft Windows (Windows Vista or Windows XP): The optical drive diagnostic may require you to have certain types of optical media available, such as a CD-RW, DVD-RW, or Blu-Ray disc.Use the troubleshooting instructions below if your CD, DVD or Blu-Ray drive is not seen in File Explorer or My Computer (it was called Windows Explorer in Microsoft Windows 7 and earlier versions of Microsoft Windows), and the drive is marked with a yellow exclamation point in Device Manager.
Note: Windows 10 Does Not include DVD/Blu-ray playback software by default, so you need the Cyberlink software (the disc that came with your drive) or something comparable.
I think part of the problem may have been Magic ISO which I used in Win7.